Collection Of Animated Bootscreen ( For Nokia 5800.5530.C6.N97.N8.E7 etc)

First Listen To The Startup Sounds Which Are Attached To This Post, Then You Will Have An Idea How Does These Mp3s Sounds Which I Have Used In The SIS Packs Below.

I Guess This Works In UnHacked Phones But Should Be Signed.

Make Sure That You Disable "Reset On Power Long Press Patch" In RomPatcher.

[Credits To Crazyyen, Oreo27, Kcube989 , ravish_919 & Liliantungary]

Samsung Boot Screen

LG Boot Screen

Sonny Boot Screen

HTC Boot Screen

Win 7 Boot screen

NAVIFIRM: A tool for obtaining firmware, product codes, more

NAVIFIRM is the ultimate all-purpose tool for downloading Nokia firmware images, obtaining lists of product codes, and finding the right product code for your phone. NAVIFIRM downloads all this straight from Nokia's servers so you don't have to wait for people to post data packages and lists of product codes.

NAVIFIRM is useful for just about anyone:

End users: Find product codes to use with NSS/NSU
Journalists: Be the first to know when new firmware hits NSU
Developers: Download ROM images for extracting files
Care Suite/Phoenix/box users: Download ROM images to flash

Additional NSU servers can be added by editing Main.cs in the source code.

To use NAVIFIRM, just start navifirm.exe and drill down from left to right. To download files, check the boxes of the files you want (or click the All button), then click "Download from FiRe". Find a directory to put the files in, then click OK. Care Suite and Phoenix should be able to pick up the firmware files if you put them in C:\Program Files\Common Files\Nokia\DataPackage (if you use Vista w/ UAC, you'll have to right-click navifirm.exe and select Run as Administrator). Note that calibration and most other non-firmware files ordinarily included in data packages cannot be downloaded via this tool. To generate a product code list suitable for forum posts, etc., select a product and release, then click the Export PC List button. From there, you can copy and paste the list of product codes or save it as a file.

This software is released with no warranty whatsoever, express or implied. If you screw up your phone trying to flash something downloaded with this tool, it definitely isn't my fault. As bricking a phone is easy, proceed with great caution. You have been warned.

To download

NaviFirmPlus_1.3.zip 

How To Flash Dead Phones Using JAF Service Suite

USE THIS MOD AT YOUR OWN RISK.

TRY THIS ONLY IF U ARE NOT ABLE TO FLASH WITH PHOENIX

some people having dead phone for using PHOENIX And that happens because the ADL server checks the CRC after the firmware upgrade, which won't match because you cooked your firmware files and will cause the boot-loader not to change back to normal operating mode. So DO NOT USE PHOENIX when upgrading CORE, ROFS2, ROFS3 cooked files, use JAF only...

INSTALLING AND SETTING UP JAF

1. Download this file
    A. JAFSetup_1.98.62.rar
    B. OGM_JAF_PKEY_Emulator_v5.rar

2. UNRAR the bothe file to your desktop
3. open the folder
4. install JAFSetup_1.98.62.exe
5. install JAF to the default location
6. Copy & Paste OGM_JAF_PKEY_Emulator to MYCOMPUTER>LOCAL DISK (C:)>PROGRAM FILE>ODEON>JAF>

Note on you only have to do "this" if you are using Vista, Windows 2003/2008 server. or Windows 7

GETTING YOUR FIRMWARE DOWNLOAD AND READY FOR FLASHING

1. go to "C:\Program Files\Nokia".
2. create a folder called "Phoenix" > C:\Program Files\Nokia\Phoenix
3. open C:\Program Files\Nokia\Phoenix
4. create a folder called "Products" > C:\Program Files\Nokia\Phoenix\Products
5. open C:\Program Files\Nokia\Phoenix\Products
6. create a folder with phones ROM VERSION > RM-xxx, C:\Program Files\Nokia\Phoenix\Products\RM-xxx
7. open C:\Program Files\Nokia\Phoenix\Products\RM-xxx, leave it open. xxx - your Rm version
8. go here http://www.symbiantalk.net/showthrea...uct-codes-more
10 download your firmware using "navifirm.exe"


DOWNLOAD NAVIFIRM: HERE

 

11. save your firmware to > C:\Program Files\Nokia\Phoenix\Products\RM-xxx

Note...

RM-xxx will be different depending on your country or region (IE, RM-505, RM-555, etc...)

USING JAF TO INSTALL COOKED ROMS

12)Install Nokia pc suite if you dont have it installed already (Cable Drivers Are installed with them and needed)

1. from main "jaf" folder.
3.click on "OGM_JAF_PKEY_Emulator_v 5.exe" then Click Go

4. JAF gets loaded
6. in JAF left click the BB5 tab
7. under "Flash Settings"...

A. uncheck "CRT 308"
B. check "Manual Flash" "Dead USB"
C. check "Normal Mode"
D. check "Use INI"

 8. Wait for INI popup window to open.
[Then a list will appear containing all phone models like the picture below]


9. scroll down to your USB FIRMWARE CABLE TYPE
10. Select firmware type (RM-???)

If JAF doesn't find the RM-xxx, just add the following two lines to the end of the file jaf_nok4models.ini (normally found in C:\Program Files\ODEON\JAF\):

 Note RM-??? will be your country or region type

11. left click "OK"
12. your FIRMWARE FILES ARE SETUP AND LOADED READY FOR FLASHING BY JAF
13. Turn Off Your Phone connect it to your pc.
14. in the "Operations Box", left click on "FLASH"
[Then Click YES when a dialog appears like on the picture below]

 15. then Jaf will ask for turn on your phone click turn on [Now Just press the Power Button on your phone a little (just for about 1 second)]
15. Wait for JAF to start flashing
16. after flash complete your phone will auto start

It's that simple, you won't ever brick your phone if you do this way.

Status LOG of Dead USB Flashing :

JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.29.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\

Searching for default location of ini...
Checking path: \Products\RM-559\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-559\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.rofs2.V19
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_C03_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_001_000_U001.uda.fpsx
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW! Searching for phone...Found
Error reading phone init data...
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW! {if you are using dead phone usb mod}
Searching for phone...Found
Sending RAW loader...
Using 009.012.005
Elf2flash 09.11.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting................PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
..........Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 586, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.core.C00...
Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
Erasing cmt zone 00D60000 - 0B71FFFF ... Erase result: 0000
Partition result: 0014
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.rofs2.V19...
Erasing cmt zone 07920000 - 0A2FFFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_C03_prd.rofs3.fpsx...
Erasing cmt zone 0A300000 - 0B71FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_001_000_U001.uda.fpsx...
Erasing cmt zone 0B720000 - 1EF7FFFF ... Erase result: 0000
Send CMT CFG...

Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.core.C00...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.rofs2.V19...
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_C03_prd.rofs3.fpsx...
Sending CMT HASH for SOS+ROFS3
Write result 27: 1701
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_001_000_U001.uda.fpsx...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: V ICPR72_10w04.5
22-03-10
RM-559
(c) Nokia
APESW: V 20.0.005
VariantSW: V 20.0.005
Prodcode: 0589421
Done!